Industrial socket installation process and common problems
When customers buy industrial sockets, they often understand people's online customer service, how should industrial sockets be installed? So let's give you a detailed explanation of how to install it in the right way?
1. First determine whether the spare parts of the industrial socket are lacking, and then prepare the relative installation of special tools in advance, if the spare parts are lacking, contact the manufacturer or carry out the purchase.
2. Usually the industrial socket is all belonging to the disassembly situation, a few are fixed with screws, put the screws into the 4 corner holes of the power socket and determine the part of the installation of the product (it is highly recommended to install it in the high altitude to prevent children from touching the product when playing and encountering maintenance), and then use the screws put into the hole to carry out fixation in the wall or other areas.
3. Then install the way required by the manufacturer: connect the switching power supply route to the industrial socket and put on the waterproof connector, which must be the same as the manufacturer's wiring method, so that you can improve the installation completion rate and change the route or other levels without authorization, which will not only make the route intertwined and cause the installation failure, but also jeopardize your safety when connecting the route.
4. After the route connection is carried out, it must only be integrated with another part of the screw fixation, and the plastic screws or other kinds of screws can be fixed without moving, if the industrial socket is used in some natural environments, the screw hole pipe joint can be installed so large and horizontal to prevent the screw from being corroded by other chemicals
2. Common problems of industrial socket application:
1. Note that the total output power of the connected household appliances cannot exceed the power of the power strip.
2. When applying, if the transmission line is relatively long, stretch the transmission line as much as possible, and do not tie the transmission line to prevent abnormal overtemperature.
3. Insert the power plug thoroughly during application, not only to facilitate the smooth operation of household appliances, but also to prevent safety accidents.
4. Another, there is no need to put the power strip control panel in an area that children can touch, children's hands are small, if they reach into the power socket hole, it is indeed inconvenient.
5. Long-term application will cause the power plug to become perm and loose, and in more serious cases, it will cause fire accidents.